die in stockpopular construction
Paper bag 350×250×100 mm — ready construction no. 241801: the cutting die for it already exists at the Pergament printing house, so a run starts without designing and making a die. Inner volume is about 8.8 L; the size suits gifts, clothing and medium-sized boxes. It is a popular construction, printed many times for different customers. Minimum run — from 100 pcs, lead time — 2–5 working days. A white plotter sample is ready in 30 minutes, and a manager sends the dieline for artwork together with a quote by construction number.
Photos and illustrations
Dimensions and specifications
| Inner size | 350×250×100 mm (350x250x100) |
|---|---|
| Construction type | Bag |
| Volume | 8.8 L (8750 cm³) |
| Parts | single blank |
| Typical run | 100–500 pcs |
| Repeat orders | 20+ orders — popular construction |
| Cutting die | in stock — no tooling cost, no waiting for a die |
| Minimum run and lead time | from 100 pcs, 2–5 working days |
| In the catalogue | since 2024 |
What it is for
A paper bag with handles is the fastest way to branded retail packaging: it is printed on one sheet, die-cut with the existing die and glued at the bottom and side seam. The 350×250×100 mm format is used by fashion and shoe stores, confectioneries, wine boutiques, beauty salons and event organisers — for gifts, medium-sized purchases and promo sets. Printing from one colour to full colour with lamination or varnish; bottom reinforcement and eyelets can be added.
This bag is landscape: at 350 mm wide by 250 mm high it behaves differently from an upright one. A portrait bag suits a bottle or a tall box; a landscape bag suits anything carried flat — a pastry box, a low cake box, a picture frame, a coffee-table book, a folded blanket. The 100 mm gusset leaves room for thickness, so the contents need not be stood on edge. The construction is glued from two halves of 470×348 mm, which keeps both the die and the press sheet compact and puts the seam on the side panels, out of the way of the artwork. In our experience this construction favours small batches: it has been printed in runs of about 200 pieces, yet reordered many times over two years. For the customer that means no cash tied up in a year’s stock — the bag is reprinted as needed in the same 2–5 days while the die waits on the shelf. A seasonal design is easy to rotate on that schedule: the next batch simply goes out with new artwork.
Industries where it is used: retail and fashion stores, confectioneries, wine boutiques, beauty salons, gift packaging.
Request the dieline and a quote from a manager
Email us
Call +373 79 044 417
Message on Telegram
Quote construction number 241801 · Construction no. 241801
We send the dieline of this construction on request. It is prepared for your artwork — with bleed, glue areas and for the chosen board — so we deliver it together with a quote: send the construction number, quantity and material, and a manager will reply within an hour during business hours. You get a ready solution with a price and lead time, not just a file.
Prototype in 30 minutes a white plotter sample of this construction — test your product before the run.
Variants and other sizes
Single-blank construction: one die, one die-cutting operation.
Other sizes of this type are collected in the section Paper bags.
Similar constructions
All constructions of this type and similar volume: Paper bags, over 8 L, the whole catalogue.
Products made on this construction
Questions and answers
Where do I get the dieline of construction no. 241801?
We hand over the dieline of construction no. 241801 together with a quote, not as a file from the site: bleed, glue areas and allowances are set in it for your run and board. An e-mail or message with number 241801, the quantity and the material is enough — a manager replies within an hour during business hours and sends the dieline for artwork and the price.
What is the price of a bag 350×250×100 mm at 300–1,000 pcs?
There is no single ‘per piece’ price for this construction — there is a run price: board, printing, finishing, die-cutting and assembly are priced per operation. The die for construction no. 241801 already exists and that line drops out of the estimate, which is most noticeable at 300–1,000 pcs. Send the quantity and material — a quote for two or three run sizes comes from a manager.
Can the size of this construction be changed?
The die is fixed: 350×250×100 mm is its inner size. A different size means a new die (plus 3–5 days and tooling cost) or a neighbouring construction from the ‘other sizes’ list. If you are unsure your product fits, order a white plotter sample — the prototype is ready in 30 minutes.
Can the bag be printed in one colour or just with a logo?
Yes. The existing die does not depend on the design: printing can range from one colour to full colour with lamination. We quote for your chosen finish.