die in stock
The cutting die for construction no. 230318 — paper bag 230×153×106 mm — is already made and kept at the Pergament printing house: a repeat run needs neither blank design nor tooling payment. Previous runs used board 200 g/m². Inner volume is about 3.7 L; the size suits small purchases, cosmetics and souvenirs. A run from 100 pcs is printed in 2–5 working days after artwork approval; a white plotter sample takes 30 minutes. A manager sends the dieline for your artwork and a quote by construction number.
Photos and illustrations
Dimensions and specifications
| Inner size | 230×153×106 mm (230x153x106) |
|---|---|
| Construction type | Bag |
| Volume | 3.7 L (3730 cm³) |
| Parts | single blank |
| Material used in practice | board 200 g/m² |
| Typical run | 100–500 pcs |
| Repeat orders | 2–5 orders |
| Cutting die | in stock — no tooling cost, no waiting for a die |
| Minimum run and lead time | from 100 pcs, 2–5 working days |
| In the catalogue | since 2023 |
What it is for
A paper bag with handles is the fastest way to branded retail packaging: it is printed on one sheet, die-cut with the existing die and glued at the bottom and side seam. The 230×153×106 mm format is used by fashion and shoe stores, confectioneries, wine boutiques, beauty salons and event organisers — for gifts, medium-sized purchases and promo sets. Printing from one colour to full colour with lamination or varnish; bottom reinforcement and eyelets can be added.
Construction no. 230318 is a landscape bag: at 230 mm it is wider than it is tall (153 mm), and the 106 mm deep gusset makes it closer to a carrier for boxes than to the classic tall, narrow shopping bag. The proportions suit contents that cannot be stood on edge — a pastry or cake box goes in flat and rests on the whole base rather than on a narrow strip. The blank is die-cut from a single sheet in one piece, with no joined halves, so the bag has one side seam and clean corners. We use 200 g/m² board here, which is enough for roughly 3.7 litres: the small wall area does not need the stiffness of a large format, and a thinner board creases more easily and folds at the bottom without cracking. Keep in mind that 200 g/m² is meant for a light load; for heavier contents we suggest a heavier grade or a reinforced base with an insert. The handle type is agreed with a manager when quoting.
Industries where it is used: retail and fashion stores, confectioneries, wine boutiques, beauty salons, gift packaging.
Request the dieline and a quote from a manager
Email us
Call +373 79 044 417
Message on Telegram
Quote construction number 230318 · Construction no. 230318
We send the dieline of this construction on request. It is prepared for your artwork — with bleed, glue areas and for the chosen board — so we deliver it together with a quote: send the construction number, quantity and material, and a manager will reply within an hour during business hours. You get a ready solution with a price and lead time, not just a file.
Prototype in 30 minutes a white plotter sample of this construction — test your product before the run.
Variants and other sizes
Single-blank construction: one die, one die-cutting operation.
Other sizes of this type are collected in the section Paper bags.
Similar constructions
All constructions of this type and similar volume: Paper bags, 3–8 L, the whole catalogue.
Products made on this construction
Questions and answers
How do I get the dieline of construction no. 230318 for my artwork?
The dieline is not published on the site: it is prepared for a specific run and board — with bleed and glue areas — and sent by a manager together with a quote. Send construction number 230318, the quantity and the material to contact@pergament.md or via Telegram — we reply within an hour during business hours.
How much does a bag 230×153×106 mm cost at 300 and 1,000 pcs?
There is no single ‘per piece’ price for this construction — there is a run price: board, printing, finishing, die-cutting and assembly are priced per operation. The die for construction no. 230318 already exists and that line drops out of the estimate, which is most noticeable at 300–1,000 pcs. Send the quantity and material — a quote for two or three run sizes comes from a manager.
What if I need a different size?
The die is fixed: 230×153×106 mm is its inner size. A different size means a new die (plus 3–5 days and tooling cost) or a neighbouring construction from the ‘other sizes’ list. If you are unsure your product fits, order a white plotter sample — the prototype is ready in 30 minutes.
What board are such bags made of?
From practice on construction no. 230318 — board 200 g/m². For bags with handles the board stiffness and crease quality matter: on an existing die they are already proven, so the run repeats without trials.
Can the bag be printed in one colour or just with a logo?
Yes. The existing die does not depend on the design: printing can range from one colour to full colour with lamination. We quote for your chosen finish.